Pyrolysis: Difference between revisions

From Climate Wiki
Jump to navigation Jump to search
No edit summary
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Definition=
==Historical==
*Amazon moundculture
*Mummy methanol
==Technical==
[[File:Match pyrolysis.png|thumb|Physical/chemical diagram of a match on fire.]]
Although it seems counterintuitive, wood actually does not burn. Instead it is the gas emitted by heating the wood that burns. Only when the wood is finally charred under the flame of the woodgas, can oxygen penetrate the then porous structure of the newly charred wood and glow the carbon to ash. Striking a match on the rough surface of the matchbox ignites a flaming chemical reaction of the sulfurous tip that generates enough heat to make the wood emit highly combustible gases. The flame ignites the gases so released from the wood and the process continues under the heat from
Although it seems counterintuitive, wood actually does not burn. Instead it is the gas emitted by heating the wood that burns. Only when the wood is finally charred under the flame of the woodgas, can oxygen penetrate the then porous structure of the newly charred wood and glow the carbon to ash. Striking a match on the rough surface of the matchbox ignites a flaming chemical reaction of the sulfurous tip that generates enough heat to make the wood emit highly combustible gases. The flame ignites the gases so released from the wood and the process continues under the heat from
the burning pyrolysis gases, causing further outgassing and burning of gas. But underneath the flame of the woodgas the wood itself does not burn but carbonizes, because the gas flame consumes all the oxygen, creating a pyrolysis zone where the flame protects the match from oxidation. As we know, the match burns with a clean flame until someone blows out the flame after which it will smoke. The
the burning pyrolysis gases, causing further outgassing and burning of gas. But underneath the flame of the woodgas the wood itself does not burn but carbonizes, because the gas flame consumes all the oxygen, creating a pyrolysis zone where the flame protects the match from oxidation. As we know, the match burns with a clean flame until someone blows out the flame after which it will smoke. The
smoke is just the last unburned and condensing residual wood vapors, released before the match cools sufficiently to stop outgassing them. [https://www.biochar-journal.org/itjo/media/doc/1437139451142.pdf]
smoke is just the last unburned and condensing residual wood vapors, released before the match cools sufficiently to stop outgassing them. <ref>Schmidt HP, Taylor P (2014): Kon-Tiki flame cap pyrolysis for the democratization of biochar production, the Biochar-Journal 2014,
Arbaz, Switzerland, pp 14 -24, www.biochar-journal.org/en/ct/39</ref>
 
=Process=
[[File:Biochar process breakdown.png|thumb|Yield ratios of primary processes ("Slow" and "Fast" refer to forms of [[pyrolysis]]).<ref>"Chapter 11: Biochar Production" in Amonette, J.E. et al. 2021</ref> ]]
 
To pyrolize feedstocks, in any form, involves a lot of heat with limited exposure to oxygen.
 
Fire will reduce biomass to ash in the presence of oxygen. Deprived of air, however, the thermal decomposition process separates biomass into gases, liquids, oxygenated compounds (e.g., methanol), and solid (biochar). The ratio between these components, given a particular feedstock, will depend on the conditions of its heating. Generally speaking, lower and slower burns will yield more char, while hotter or shorter processes yield oils and gases potentially useful as [[biofuel]].
 
The nested sections below offer practical details on these different processes.
 
*Effective charring can require preparation of the feedstocks, through drying and/or size reduction, making dead or waste materials often the most ideal candidates. Pretreatment may be necessary, however, depending on the feedstock and reactor in question.
 
*The final step of any process is its quenching, in which the fire is put out and the char itself better activated, most often with water but sometimes with urine or dirt.
 
//Section content, unless otherwise cited, sourced from: <ref>Amonette, J.E., et al. 2021. ''Biomass to Biochar: Maximizing the Carbon Value.'' Report by Center for Sustaining Agriculture and Natural Resources, Washington State University, Pullman WA.https://csanr.wsu.edu/biomass2biochar/</ref>
 
//Bullet point data mostly taken from: <ref>''Journal of Analytic and Applied Pyrolysis'' 2022 (in which "yield" refers to biochar weight). https://doi.org/10.1016/j.jaap.2021.105405</ref>
 
==Torrefaction==
 
*200-300 °C
*10-60 minutes
*70-90 % yield
*Good for biocoal


[[File:Match pyrolysis.png|thumb|Physical/chemical diagram of a match on fire.]]
Torrefaction is also called mild pyrolysis, as it still involves heating biomass in an "inert" or oxygen-deficit environment, but only to a maximum temperature of 300°C. The biomass will evaporate both its water content and some volatile organic compounds. This process yields a uniform product of lower moisture, and higher energy content, than raw biomass. It is also easier to grind due to its brittle quality. <ref>Tumuluru, Ghiasi, Soelberg and Sokhansanj. "Biomass Torrefaction Process, Product Properties, Reactor Types, and Moving Bed Reactor Design Concepts"''Frontiers in Energy Research'' Vol. 9 (2021) https://doi.org/10.3389/fenrg.2021.728140</ref>
 
==Slow Pyrolysis==
 
*300-800 °C
*minutes to days
*25-35 % yield
*Good for biochar
 
Slow pyrolysis, also called conventional carbonization, produces biochar by heating biomass at a low heating rate (around 5-7 °C per minute) for a relatively long residence time and typically uses large particles. These conditions produce less liquid and more biochar than fast pyrolysis. In general, slow pyrolysis requires less pretreatment of the feedstock than fast pyrolysis.
 
==Fast Pyrolysis==
 
*400-700 °C
*0.5-10 seconds
*12-15 % yield
*Good for biooil
 
Fast pyrolysis describes heating rates of over 300 °C/min., which are typically used to obtain high yields of single-phase bio-oil. Fast pyrolysis uses small particles, generally smaller than 5 mm in diameter, due to the low thermal conductivity of lignocellulosic materials.
 
==Gasification==
 
*750-1000 °C
*seconds to hours
*5-10 % yield
*Good for biogas
 
Gasification differs from pyrolysis in that some oxygen is present at much higher temperatures (>750 °C). Gasification has been used since the 1800s in energy generation from coal and biomass. Gasification converts carbon-based materials into carbon monoxide, hydrogen, and carbon dioxide (syngas or producer gas). The gas mixture can then be combusted to generate power. While gasification technologies were designed for power, rather than biochar production, biochar can be produced with this approach.
 
==Combustion==
 
*1000-1200 °C
*1-2 % yield
*Good for heat
 
Biomass is fired and allowed to breathe, producing gases to be burned up, thus driving the continuation of the process. Reactors relying on combustion are primarily designed for generating heat,  commonly used for a combination of steam turbine electrical generation and secondary heat uses such as curing lumber or drying grain.  


Though the word combustion seems antithetical to the production of biofuel, it is ironically combustion -- that ordinary, everyday technology -- that is perhaps responsible for a majority of biochar produced on [[Mother Earth]] (biogas as well, although it is expended immediately to sustain the combustion). The key is that combustion technologies are in this sense imperfect; they hardly ever manage 100% complete combustion, which would theoretically yield ash as its only solid product. When oxygen is present, but insufficient for complete combustion, biochar remains. Combustion for a boiler will generally yield 1.5-2% biochar.


=Product=
[[File:Pyrolysis temperature yield curves.png]]
https://permanent.fdlp.gov/gpo129286/fpl_gtr270.pdf
https://permanent.fdlp.gov/gpo129286/fpl_gtr270.pdf




==Char==
[[biochar]]


[[File:Pyrolysis temperature yield curves.png]]
==Oil==
==Gas==
[[biogas]]
 
=Sources=

Latest revision as of 16:46, 16 March 2023

Definition

Historical

  • Amazon moundculture
  • Mummy methanol

Technical

Physical/chemical diagram of a match on fire.

Although it seems counterintuitive, wood actually does not burn. Instead it is the gas emitted by heating the wood that burns. Only when the wood is finally charred under the flame of the woodgas, can oxygen penetrate the then porous structure of the newly charred wood and glow the carbon to ash. Striking a match on the rough surface of the matchbox ignites a flaming chemical reaction of the sulfurous tip that generates enough heat to make the wood emit highly combustible gases. The flame ignites the gases so released from the wood and the process continues under the heat from the burning pyrolysis gases, causing further outgassing and burning of gas. But underneath the flame of the woodgas the wood itself does not burn but carbonizes, because the gas flame consumes all the oxygen, creating a pyrolysis zone where the flame protects the match from oxidation. As we know, the match burns with a clean flame until someone blows out the flame after which it will smoke. The smoke is just the last unburned and condensing residual wood vapors, released before the match cools sufficiently to stop outgassing them. [1]

Process

Yield ratios of primary processes ("Slow" and "Fast" refer to forms of pyrolysis).[2]

To pyrolize feedstocks, in any form, involves a lot of heat with limited exposure to oxygen.

Fire will reduce biomass to ash in the presence of oxygen. Deprived of air, however, the thermal decomposition process separates biomass into gases, liquids, oxygenated compounds (e.g., methanol), and solid (biochar). The ratio between these components, given a particular feedstock, will depend on the conditions of its heating. Generally speaking, lower and slower burns will yield more char, while hotter or shorter processes yield oils and gases potentially useful as biofuel.

The nested sections below offer practical details on these different processes.

  • Effective charring can require preparation of the feedstocks, through drying and/or size reduction, making dead or waste materials often the most ideal candidates. Pretreatment may be necessary, however, depending on the feedstock and reactor in question.
  • The final step of any process is its quenching, in which the fire is put out and the char itself better activated, most often with water but sometimes with urine or dirt.

//Section content, unless otherwise cited, sourced from: [3]

//Bullet point data mostly taken from: [4]

Torrefaction

  • 200-300 °C
  • 10-60 minutes
  • 70-90 % yield
  • Good for biocoal

Torrefaction is also called mild pyrolysis, as it still involves heating biomass in an "inert" or oxygen-deficit environment, but only to a maximum temperature of 300°C. The biomass will evaporate both its water content and some volatile organic compounds. This process yields a uniform product of lower moisture, and higher energy content, than raw biomass. It is also easier to grind due to its brittle quality. [5]

Slow Pyrolysis

  • 300-800 °C
  • minutes to days
  • 25-35 % yield
  • Good for biochar

Slow pyrolysis, also called conventional carbonization, produces biochar by heating biomass at a low heating rate (around 5-7 °C per minute) for a relatively long residence time and typically uses large particles. These conditions produce less liquid and more biochar than fast pyrolysis. In general, slow pyrolysis requires less pretreatment of the feedstock than fast pyrolysis.

Fast Pyrolysis

  • 400-700 °C
  • 0.5-10 seconds
  • 12-15 % yield
  • Good for biooil

Fast pyrolysis describes heating rates of over 300 °C/min., which are typically used to obtain high yields of single-phase bio-oil. Fast pyrolysis uses small particles, generally smaller than 5 mm in diameter, due to the low thermal conductivity of lignocellulosic materials.

Gasification

  • 750-1000 °C
  • seconds to hours
  • 5-10 % yield
  • Good for biogas

Gasification differs from pyrolysis in that some oxygen is present at much higher temperatures (>750 °C). Gasification has been used since the 1800s in energy generation from coal and biomass. Gasification converts carbon-based materials into carbon monoxide, hydrogen, and carbon dioxide (syngas or producer gas). The gas mixture can then be combusted to generate power. While gasification technologies were designed for power, rather than biochar production, biochar can be produced with this approach.

Combustion

  • 1000-1200 °C
  • 1-2 % yield
  • Good for heat

Biomass is fired and allowed to breathe, producing gases to be burned up, thus driving the continuation of the process. Reactors relying on combustion are primarily designed for generating heat, commonly used for a combination of steam turbine electrical generation and secondary heat uses such as curing lumber or drying grain.

Though the word combustion seems antithetical to the production of biofuel, it is ironically combustion -- that ordinary, everyday technology -- that is perhaps responsible for a majority of biochar produced on Mother Earth (biogas as well, although it is expended immediately to sustain the combustion). The key is that combustion technologies are in this sense imperfect; they hardly ever manage 100% complete combustion, which would theoretically yield ash as its only solid product. When oxygen is present, but insufficient for complete combustion, biochar remains. Combustion for a boiler will generally yield 1.5-2% biochar.

Product

Pyrolysis temperature yield curves.png https://permanent.fdlp.gov/gpo129286/fpl_gtr270.pdf


Char

biochar

Oil

Gas

biogas

Sources

  1. Schmidt HP, Taylor P (2014): Kon-Tiki flame cap pyrolysis for the democratization of biochar production, the Biochar-Journal 2014, Arbaz, Switzerland, pp 14 -24, www.biochar-journal.org/en/ct/39
  2. "Chapter 11: Biochar Production" in Amonette, J.E. et al. 2021
  3. Amonette, J.E., et al. 2021. Biomass to Biochar: Maximizing the Carbon Value. Report by Center for Sustaining Agriculture and Natural Resources, Washington State University, Pullman WA.https://csanr.wsu.edu/biomass2biochar/
  4. Journal of Analytic and Applied Pyrolysis 2022 (in which "yield" refers to biochar weight). https://doi.org/10.1016/j.jaap.2021.105405
  5. Tumuluru, Ghiasi, Soelberg and Sokhansanj. "Biomass Torrefaction Process, Product Properties, Reactor Types, and Moving Bed Reactor Design Concepts"Frontiers in Energy Research Vol. 9 (2021) https://doi.org/10.3389/fenrg.2021.728140